Image Trans DCL-P (printer) guide
Recommended Applications
White or light colored fabrics including 100% cotton, polyester or poly/cotton blends,
mousepads, coasters, cardstock and fabric puzzles, binders, cotton rag paper, leather, cork and
wood.
Printing Equipment
Image Trans CL Non Oil - Printer works in Non-Oil Color Laser Desktop Printers that can only run
8.5 x 11 and A4 size paper.
Paper Feeding Direction
Size: Feed Direction: (see reverse)
8.5 x 11 Short Edge Leading (8.5 inch)
A4 Short Edge Leading (210 mm)
Printing
- Fan paper to separate
- Feed transfer paper from bypass tray—short edge leading (single or multi sheet).
- Copy/Print on the coated side of the transfer paper.
- Reduce toner levels or lighten image by approximately 20%.
- Copy/Print Mirror Image.
- Image Trans CL Non Oil - Printer was developed to run in Plain Paper Mode. Some printers may require paper to be run in Heavy Stock Mode.
Transfer with Heat Press
- Trim away the unprinted paper around your image with scissors/exacto knife.
- Position the imaged sheet with printed side face down.
- Press at 350°F (175°C) using heavy pressure for 30 seconds.
- Peel the backing paper off, slowly while warm.
Washing Instructions
- Always turn textile inside out before washing.
- Recommended: Machine wash in cold water.
- Optional: Machine wash in warm water (40°C).
- Use mild detergent. Do not use harsh or bleaching materials.
- Recommended: Hang dry
- Optional: Tumble dry with cool or warm air setting. Do not use fabric softeners.
- After washing we recommend turning shirt inside out and ironing the image from the back.
- Do not Dry Clean